Hilti Toggler wall anchors for 5/16 18 bolt size Box of 25

Description

The patented SNAPTOGGLE toggle bolt installs fastest and holds the most weight in the smallest hole of all toggle bolts: up to 2x the load of wing toggles of comparable screw size. It features a one-piece steel anchoring channel that does NOT fall behind the wall when the bolt is removed, allowing re-use of the anchor in the same hole. The channel pivots on the durable installation legs. The sliding cap zips down the legs to securely "capture" the wall between the channel and the cap. The legs snap off easily, flush with the wall, but do not break prematurely. Place item to be attached, insert bolt and tighten flush for easy, reliable, vibration-resistant anchoring.
Holds up to 1,400 lb in concrete block and up to 480 lb in 5/8" drywall (Industry standards recommend 1/4 of this ultimate load per anchor)
Works in walls & ceilings 3/8" to 3-5/8" thick
Fast, easy one-person installation.
Can use a screw gun-anchor does not spin.
Can remove bolt for maintenance or repair of fixture or wall or ceiling, then reinstall bolt in the same anchor
Use any bolt with 5/16"-18 thread and minimum thread length equal to the thickness of the wall + the thickness of the item being fastened + 1/2"