AMX FGN1122-SA, NMX-ENC-N1122, Video Encoder

Description

AMX FGN1122-SA, NMX-ENC-N1122, Encoder.
Shipping to HI and AK.
The NMX-ENC-N1122 provides users with two RJ45 network ports (one POE). All MPC N1000 series includes output scaling, serial, balanced audio, and HDMI video connection. The N1000 Series is the perfect solution for in-room or small video matrices under 32×32 in size.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a large 32×32 matrix switcher using off-the-shelf layer-3 network switches.
The ability to send IP Media for distribution using common managed network switches in any size and configuration makes N1000 solutions extremely flexible and easy to deploy.
Common Applications
The NMX-ENC-N1122 is the perfect solution for any low-latency application and video matrix smaller than 32x32. Common applications include classrooms, conference rooms, performing arts, and sports bars.
Features
Output Scaling
– Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
1 Frame Latency
– Same as HDBaseT
Minimal Proprietary Compression (MPC)
– Visually lossless MPC algorithm
Power Over Ethernet (PoE)
– PoE eliminates the need for power supply
Infrared (IR)
– Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control
– All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unmatched Flexibility
– Highly competitive pricing for matrices up to 32x32
Separate Inputs
– Separate HDMI and VGA input connectors on the encoder
Two RJ45 Ports
– Encoder features two RJ45 network ports (one PoE)
Stand Alone or Card
– Available as a stand alone device, or card for use with NMX-ACC-N9206
Specifications
Digital Video Input
HDMI, DVI-D (through adapter), RGB/VGA
Analog Video Input
HD-15 VGA, Component, supported through a passive adapter
Video Outputs
Network video over Ethernet via RJ45 port
Video Formats
HDMI, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr; DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
Progressive Input Resolutions
Supports most common HD up to 1920x1200. See Data Sheet for details.
Interlaced Input Resolutions
Supports 1080i60. See Data Sheet for details.
Analog Input Resolutions
Supports most common HD up to 1920x1200. See Data Sheet for details.
Analog-To-Digital Conversion
8-bit 165 MHz per each of three color channels
Audio Input Signal Types
Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
Audio Output Signal Types
Ethernet
HDMI Audio Formats
8ch PCM
Analog Audio Formats
Stereo 2-channel
Audio Analog-to-Digital Conversion
16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency
10 ms at 60 fps. See Data Sheet for details.
Communications
Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP; HDMI: HDCP, EDID management. See Data Sheet for details.
FG Numbers
FGN1122-SA